Canberra Treco Delivery & Installation Information
Canberra Treco Product Range
Our Canberra Treco metal sheds are made in Australia to a high standard from hot-dipped galvanized and pre-painted steel, and are virtually maintenance free. All Canberra buildings come with a 20-year 'no rust perforation' warranty, and are designed to have lasting good looks, won't crack or warp, and are both rot and rodent proof. The Canberra shed range includes the Canberra 6ft, 8ft and 10ft Apex, Canberra Pent, Lean-to, Workshops, Garages, and Utility Storage Unit. You can view the full range here.
Current (Red Zone delivery only) Lead Time - 14 days
We can deliver Canberra products throughout the UK. Most deliveries take approximately 10 working days (unless you are in a remote area), and are free within the red zone marked above. We can still deliver to the grey areas, but there will be a surcharge and the delivery time will be extended. Please call for an accurate quotation before ordering if you are in one of these areas.
Installation Lead Time - 28 daysInstallation is available in most mainland areas, and the charge varies depending upon the item. You can find more information regarding Canberra installation prices here.
When will I know my delivery date?
Does someone need to sign for the product on delivery?
Preferably be available at the property to accept your delivery. If you cannot do this please provide email authority for the product to be left and that you accept liability.
Will the driver need any help?
No. the drivers will not ask for any help in offloading your building.
The imperial size stated is an indication only. Metric sizes are more accurate.
What accessories are available?
A Foundation Kit is a metal frame that can be fitted to almost any surface (including soil). Galvanised steel channels assemble to give a foundation area. The building is then fastened to the frame, which can then be sheeted over with plywood, or be filled with concrete after first inserting a plastic sheet below to prevent dampness rising. A Wooden Floor Kit not required with this option.
Timber Floor Kit
The timber floor consists of fully pressure impregnated tongue and groove boards and bearers. These pressure-treated timber are rot-resistant, and will last as long as the shed itself. Nails are included for assembly, plus screws to fix the shed base rails to the top surface of the floor. A Foundation Kit is not required with this item.
Long Shelf supports and rails covered with 12mm MDF shelving material, and fits to the rear wall of the shed for secure shelving. The kit comprises of either a Single Shelf, or a Double Shelf. Straight shelves also help to make your shed more rigid. We will assemble and fit your Single Shelf at no additional charge if purchased with the shed installation service, however there is a small charge for the Double Shelf.
Canberra Corner Shelves are made with galvanised shelves and supports supplied in kits of one or three shelves. They are simple to fit and provide a good level of storage space to help organize all those small items. We will assemble your corner shelves for you at no additional charge if purchased with the shed installation service.
The Canberra Skylight Panel is a translucent roof sheet which allows daylight into the shed interior. It replaces one full width roof panel, and is very easy to fit. So easy in fact, that we don't charge any extra for fitting the Skylight Panels for you if purchased with the shed installation service. Three sizes are available to suit the Canberra Apex Steel Sheds 6ft wide, 8ft wide and 10ft wide.
The Canberra Window Unit is a 3mm thick sliding acrylic window fitted into it's own frame. It is approximately 615 W x 330 H (mm) which allows plenty of light and ventilation into your shed. The kit is supplied with it's own cut-down steel panel, making it easier to fit. Due to it's colour, this Window Kit is only suitable for certain Canberra buildings.
Hilti Fixing Kit
The Canberra Hilti Anchor Kit consists of concrete fixings which fit through pre-drilled holes in the sheds base rails. Kit supplied with an appropriate sized masonry drill bit. Used to secure a shed to an existing concrete or slab base. These fixings aren't required for the Timber Floor, Foundation Kit or our Professional Installation Service, as our fitter will supply them free-of-charge.
IMPORTANT: Imperial sizes shown in the description are approximate, and are provided by the manufacturer purely as a guide. Please refer to the metric dimensions for more accurate sizes, or contact us prior to purchase if you have any specific requirements.