Shire Bradley Log Cabin
The Shire Bradley Log Cabin is a solid, sturdy garden building made with 19mm T&G Log walls, and a T&G floor AND roof! The Bradley is available in 3x sizes 7x7, 8x8 and 9x9, and has been manufactured from smooth planed white pine from sustainable forests. It is supplied untreated, therefore to ensure a long life, a weatherproofing preservative topcoat will be required immediately. One large opening glass window is supplied, and it can be fitted to either side of the cabin. Solid double doors are supplied with an internal rimlock for security, and a knob handle for convenience. Heavy duty pressure-treated floor bearers are supplied for peace of mind.
- FREE delivery*
- High quality slow-growing scandinavian timber
- 19mm thick interlocking wall boards
- Manufacturers limited 10-year guarantee
- Solid double door c/w internal lock & knob handle
- Opening glass window
- Professional installation available
- Heavy Duty 38kg mineral roofing felt
- Tongue and groove roof and floor
- Heavy duty (34x62mm), pressure-treated floor bearers
- Straightforward DIY assembly
The Shire Bradley Log Cabin is manufactured with 19mm thick tongue & groove cladding on the walls, and 10mm t&g floor AND roof. One opening window is supplied, and it can be positioned either side of the cabin. This log cabin is supplied with heavy-duty, 34x62mm pressure-treated under-floor bearers as standard.
Only the best timber is used by Shire for production of their Log Cabins. Timber is imported from Russia and Sweden where trees are grown very slowly, resulting in the best material with less branches and therefore few knots. The timber is milled at Shire's mill in Wisbech which means Shire are able to quality control timber from start to finished product.
The Shire Log Cabin range is supplied un-treated, ready to accept any preservative colour of your choice. The under-floor bearers are pressure-treated (Tanalised) to prevent any rot.
A wide, solid double-door (1410mm wide) is supplied, complete with a rimlock for security. Knob handles are also supplied for your convenience.
Doors and Locking System
These buildings are supplied in a flat-pack design with smaller pieces allowing for easy transportation through your house or garage! Assembly is straight-forward for the competent DIY'er, and no professional experience is necessary. Normally 2 people can usually complete the job in a few hours.
Professional Assembly Option
If you aren't able to install this building yourself, we can arrange for a professional erecting team to build it for you. We require clear access and a suitably prepared, firm, level site to be ready when the installers arrive.
This garden building is supplied as a full kit, complete with all necessary fixings, fastenings glazing and roofing materials. No optional extras are available except for the professional assembly option.
Please contact us prior to purchase if you have any queries regarding the dimensions. Information shown above has been supplied by the manufacturer, and is as accurate as possible (errors and omissions excepted), however it is intended only as a guide. We recommend that you install the building on a solid, free-draining base, with at least 60cm free space all around for maintenance and to avoid splashback. You should treat all sections with a high quality, spirit-based preservative prior to assembly, and subsequently every year in accordance with the manufacturers instructions. Please ensure that regular general maintenance is carried out on all moving parts, and that the roofing felt is regularly inspected, and replaced if required.
All products are delivered sectional/flat-packed to kerbside unless stated otherwise. Deliveries are available for most of mainland England, Wales and Scotland, however no deliveries are available to the Yellow Zone, or to any island or offshore area... please see map below, or click here for more information.
The current delivery lead time shown is typical for Red Zones, however this is approximate and cannot be guaranteed. The lead time may be longer for outlying areas. Installation is available for most delivery areas, however this will extend the lead time to approximately 28 days.