Shire Buckingham 7x7 Summerhouse
The Shire Buckingham Summerhouse is a superb value summer house made with T&G walls, floor AND roof! and will fit a compact area of your garden beautifully. It comes pre-treated with a honey coloured preservative and glass windows. The Buckingham is available in a 7x7, has been manufactured from smooth planed white pine from sustainable forests, and is pre-treated with a mould-resistant, anti-fungicidal basecoat, however to ensure a long life a weatherproofing preservative topcoat will be required. One large opening glass window and three-quarter glazed double-doors allow in plenty of light. The opening window can be placed on either side of the building.
- FREE delivery*
- FREE anti-fungicidal mould-resistant basecoat
- Manufacturers 10-year guarantee
- Fully glazed doors
- Opening glass window
- Professional installation available
- Optional pressure-treated building base c/w metal spikes
- Factory applied preservative top-coat option
- Mineral roofing felt
- 12mm tongue and groove walls, roof and floor
- Wide double doors
- Modular construction
- Straightforward DIY assembly
The Shire Buckingham Summerhouse is manufactured with 35 x 35mm framing. All models come with 12mm thick tongue & groove cladding on the walls, floor AND roof. One opening side window is supplied as standard.
All sheds in the Shire garden building range are supplied pre-treated with a high quality, water-based, non-toxic anti-fungicidal basecoat. This ensures that your garden building is ready to accept any preservative colour of your choice. A factory-applied preservative topcoat is also available, however this is not a decorative finish.
A double door 1360mm wide is supplied, complete with a black iron door latch.
Doors and Locking System
These buildings are supplied in a flat-pack modular design with smaller panels allowing for easy transportation through your house or garage! Assembly is straight-forward for the competent DIY'er, and no professional experience is necessary. Normally 2 people can usually complete the job in 2-4 hours.
Professional Assembly Option
If you aren't able to install this building yourself, we can arrange for a professional erecting team to build it for you. We require clear access and a suitably prepared, firm, level site to be ready when the installers arrive.
This garden building is supplied as a full kit, complete with all necessary fixings, fastenings glazing and roofing materials. Optional extras include professional assembly, additional clear topcoat preservative, and a pressure-treated timber base c/w adjustable metal spikes.
Please contact us prior to purchase if you have any queries regarding the dimensions. Information shown above has been supplied by the manufacturer, and is as accurate as possible (errors and omissions excepted), however it is intended only as a guide. We recommend that you install the building on a solid, free-draining base, with at least 60cm free space all around for maintenance and to avoid splashback. You should treat all sections with a high quality, spirit-based preservative prior to assembly, and subsequently every year in accordance with the manufacturers instructions. Please ensure that regular general maintenance is carried out on all moving parts, and that the roofing felt is regularly inspected, and replaced if required.
All products are delivered sectional/flat-packed to kerbside unless stated otherwise. Deliveries are available for most of mainland England, Wales and Scotland, however no deliveries are available to the Yellow Zone, or to any island or offshore area... please see map below, or click here for more information.
The current delivery lead time shown is typical for Red Zones, however this is approximate and cannot be guaranteed. The lead time may be longer for outlying areas. Installation is available for most delivery areas, however this will extend the lead time to approximately 28 days.